Description
Inova On-Time Synchronized Networked Clocks
Power over Ethernet Injector
The Power over Ethernet (PoE) Injector is a cost-effective and convenient way to deliver power to your Inova networked clocks. Simply plug-in the Ethernet cables, and your job is done!
This small PoE injector is ideal for small, unventilated spaces, including behind walls or above suspended ceilings, to maximize aesthetics.
Power over Ethernet Injector |
|
PoE Injector for Inova On-Time Clocks: Specifications
|
Input |
|
|
AC Input Voltage Range |
90 to 264 VAC |
|
AC Input Current |
90 VAC: 0.5 A (RMS) Max |
|
Leakage Current |
0.25 mA Max at 254 VAC 60 Hz |
|
AC Input Frequency |
47 - 63 Hz |
|
AC Inrush Current |
115 VAC: 15 A (RMS) |
|
Output |
|
|
Total Output Power |
19.6 W |
|
Efficiency |
65% (Typical) at Max Load & 120 VAC 60 Hz |
|
Hold-up Time |
16 mS at 120 VAC & Max Load |
|
Transient O/P Voltage Protection |
60 V Max at Switch On & Off at Any AC Line Phase |
|
Isolation Test |
|
|
Primary to Secondary |
3000 VAC for 1 Minute 10 mA |
|
Primary to F.G. |
1500 VAC for 1 Minute |
|
Output to F.G. |
1500 VAC |
|
Immunity |
|
|
ESD |
EN61000-4-2. Level 3 |
|
RS |
EN61000-4-3. Level 2 |
|
EFT |
EN61000-4-4. Level 2 |
|
Surge |
EN61000-4-5. Level 3 |
|
CS |
EN61000-4-6. Level 2 |
|
Voltage Dips |
EN61000-4-11 |
|
Harmonic |
EN61000-3-2 |
|
Insulation Resistance |
|
|
Primary to Secondary |
>10M OHM 500 VDC |
|
Primary to F.C. |
>10M OHM 500 VDC |
|
Input & Interface |
|
|
Input |
IEC320 Inlet 3-Pin |
|
Indicators |
1) LED Indicator (Green) for Input Power |
|
Surge Protection |
|
|
Surge Protection |
Output Protected by Short Management (802.3af Specification) to Prevent Permanent Damage |
|
Environmental |
|
|
Temperature |
Operating Temperature: 0 to 40° C |
|
Operating Humidity |
5 to 90%, Non-Condensing |
|
Dimensions |
5.51" (L) x 2.55" (W) x 1.42" (H) |
|
Weight |
0.44 Lbs. (0.2 Kg) |
|
Certifications |
|
|
Approvals |
cUL/UL, CE, TUV |
